Contact
Phone: +65 / 6254 5080
Our person to contact
at AERZEN ASIA PTE LTD
more
Request for quotation
Of course we are at your service for designing the optimal machine for your case of application.
more
Downloads
- Product brochures
Aerzen positive displacement blowers for biogas/landfill gas
- Operating instructions
- Products
- Positive Displacement Blowers
- Blower units DELT...
Blower units DELTA BLOWER for landfill- and biogas
Positive Displacement Blowers
The positive displacement blower units DELTA BLOWER have been modified specially for applications in the range of landfill- and biogas as well as also natural - or town gas. Intake volume flow approx. 60 up to 2.500 m³/h.
|
|
Compression of bio- / landfill gases and other non-inert gases
The specific utilization of bio – and landfill gases contributes to reduce the emissions of gases which are dangerous for the climate by generating power. In block-type thermal power stations (BHKW) current is produced in gas motor – generator aggregates. The waste heat arising during combustion is supplied via heat exchangers to a further utilization. Concerning gas exhaust and admission pressure production for block-type thermal power station and flare unit, gas compressors are used. Aerzen gas units are designed for the conveyance and compression of landfill - and biogas as well as natural - or town gas. The blowers can be operated with differential pressures up to 700 resp. 1000 mbar depending on blower size and intake pressure.
Standard - scope of supply
- Blower stage with gastight sealing of the driving shaft, (explosion-proof up to 12 bar with TÜV - certificate or strength test by a hydrostatic test with 5 bar), combined conveying chamber sealing for humid landfill gas (option), special corrosion protection-coating of the rotors and the conveying chamber (option).
- Base support with integrated discharge silencer dimensioned for operating overpressure 1 bar (explosion-proof 12 bar)
- Flexible machinery mountings with fixing bolts
- Hinged motor mounting plate as belt tensioning device
- Belt drive complete (narrow v-belts antistatic)
- Belt guard (spark-safe) (in case of design with acoustic hood hand guard)
- Suction silencer dimensioned for operating overpressure 0,1 / 1,0 bar (explosion-proof 12 bar)
- Non-return flap for installation between two flanges
- Axial compensators suction - and discharge side
- Starting strainer with intermediate ring
- Driving motor
Among others the following components are available in addition beside the described standard concept:
- Bypass operation with overflow regulator for keeping the discharge pressure
- Pressure protection via safety relief valve
- Bypass with start-up unloading device
- Purge gas station (admission of the neutral chambers with purge gas)
- Shut-off devices (e.g. ball cocks)
- Instrumentation and protection
- Acoustic hood
After arrangement special designs and modifications regarding design and material are possible.
Acc. to EC-guideline 94/9/EC (ATEX) the units can be used within the appliance group II in category 2 with corresponding equipment – therefore zone 1 internal and external (temperature class T3).